Terminal Unit- RHF
W:69" H:36" D:37"
Back Height: 17"
Arm Heigh: 24"
Arm width: 5"
Inside Seat Dimensions:
W: 71" H:20" D:67/23"
Leg Height: 6"
The wooden frame on this collection is composed of beech wood and ash. These woods are selected at source and seasoned for a minimum of 2 years to ensure long term durability. All of the corners and load bearing areas of our frames are additionally secured with heavy duty corner blocks to add to the strength and durability of the frame. Upon completion of the construction of the frame, we encase the entire structure. This process ensures the strength and integrity of the frame. We the put one inch of foam around the frame before upholstery so that when you touch the sides and backs you notice a firm/soft sensation not four inches of play between the leather and frame as you would find with most of our competitors.
We incorporate in our suspension unit; heavy duty 9 gauge sinuous spring steel. These "S: shaped steel springs are fastened to the top of the front rail and run from the front to the back of the piece two inches apart. These springs are attached to the frame using heavy duty clips. Two firm rods are used to hold the springs in place which offers additional durability to the sitting area, both on the front and the back of each individual seat. We also attach a canvas barrier between the foam and the steel springs. This does not allow the foam to wear. We use five steel springs per seat to ensure the strength, comfort and durability of the foam cushion core. In addition: we use two solid wooden stretchers that run front to back to stabilize and strengthen the frame against the tension of the steel sinuous springs. This adds to the strength of the frame itself.
Leather - 307 Gun Metal Gray :
The leather on this collection is semi aniline. This means that the leather is colored thru and thru and does possess a light protective coat of polyurethane on the surface of the leather. This gives the consumer versatility in wear and use; most common household stains can be easily cleaned with a damp cloth and mild soap if addressed within minutes of the spill, spot or stain. You will notice some color variation and grain variations between each piece and sometimes within the same piece. These are natural characteristics and should not be considered unusual. This leather is a beautiful buttery soft gun metal gray and it is undeniably unique.
Cushions & Seating:
The seat cushions are composed of polyurethane foam cores with a high quality Dacron topper for comfort. We also incorporate a MEMORY FOAM layer for additional comfort and durability. You will find the density of the seat cushions will vary from 2.0 to 2.3. This is a unit of measurement of the number of porous holes in the cushion. The standard quality in our industry would be 1.8. The back cushions are composed of Dacron fiber which is blown by computer into vertically and horizontally channeled bags. This ensures that the proper amount of Dacron is blown in the same every time. The POCKET COIL seating is also present here as this enhanced seating comes standard in all Luke Leather products and adds years of durability to the seating.
Sales Features and Benefits of the Carlo Group:
The Carlo Collection should be considered CASUAL CONTEMPORARY in style and design. There are many really cool design features that come with this collection. You will notice the beautiful contemporary track arm. The comfort is phenomenal and the profile (side view) is so clean and distinctive. You will also notice the solid wooden espresso legs. The lines on these legs are really cool. Please take a closer look! You will love this collection.